Mission public works staff are in day two of cleaning up a sewage spill that took place yesterday (May 20) morning on the construction site of the new forcemain crossing. / Submitted Photo

Mission public works staff are in day two of cleaning up a sewage spill that took place yesterday (May 20) morning on the construction site of the new forcemain crossing. / Submitted Photo

Sewage spill at Mission’s new forcemain crossing construction site

There is no evidence at this time of sewage entering the Fraser River

Mission public works staff are in day two of cleaning up a sewage spill that took place yesterday (May 20) morning on the construction site of the new forcemain crossing.

Initial clean-up is expected to be completed today (May 21), with further assessment to take place afterward to ensure the site is free of contamination.

According to a city press release, “the spill happened after an emergency switchover was required due to a pump station electrical issue that resulted after the storm on May 19. Staff have been working according to the City’s Emergency Response Plan to address all issues related to this spill.”

READ: New sewer pipe in place

The city has released the following information:

Public works staff were notified at 6:46 a.m. Friday of a sewage spill at the construction site.

Staff were on site at 7 a.m. and the spillage was stopped 15 minutes later.

It is estimated that 2,500m3 of sewage was spilled on the lands within the berms of the construction site. There is no evidence at this time of sewage entering the Fraser River.

An environmental professional was on site to assess the situation. For the remainder of the day hydrovac trucks cleared the material and hauled it to the Lougheed pump station for disposal at the JAMES Treatment Plant. It is expected that the material will be cleared today.

The details:

According to the city, “the spillage occurred due to a valve that was mistakenly left open during a switchover. This emergency switchover was required due to a pump station electrical issue that resulted from damage during a storm on the evening of Thursday, May 19. This damage lead to a PLC failure at the Harbour pump station, which is still out of commission at this time.”

After the initial clean-up is completed today, a full assessment will take place to ensure the site is free of any contamination.

The map below shows the location of the spill.

 

Map